A modified vinyl acrylic interior semigloss paint with good adhesion to most substrates. Designed
for application on smooth or textured walls and ceilings. Ideal for new residential construction.
|
|
|
| Color: |
Full range |
|
| Finish: |
Semigloss |
|
| Density: |
10.23# per gallon |
|
| Clean-Up: |
Mild soap and water |
|
| VOC: |
77 gm/liter minus water |
|
| Volume Solids: |
31.2% |
|
|
| Flash Point: |
N/A |
|
| Coverage: |
310-360 sq. ft. per gallon @
1.5 dry mils ideal film thickness. Two coats recommended for even
coverage. Coverage
depends on porosity and profile of surface.
|
|
Theoretical
Coverage: |
348 sq. ft. @ 1.5 dry mils |
|
| Dry Time: |
One hour to touch @ 70°F and 50% relative humidity. Four hours to recoat @
70°F and 50% relative humidity. |
|
| Application: |
Brush, roll or spray. Spraying and
backrolling recommended on new flat work. Do not apply at
temperatures below 45°F. Keep product from freezing. |
|
|
|
Rev
3/09
|
|
Performance Semigloss is a durable, interior finish specially formulated for professional use.
Performance is intended for use on new wallboard; smooth or textured, and may also be used on previously painted wood,
plaster, masonry and metal surfaces. This high-sheen product is very washable and perfect for areas that are more
susceptible to dirt, grease and moisture. Ideal for high-traffic areas or residential and commercial walls.
|
PVA
Titanium dioxide & extender pigments
Contains no lead or mercury
VOC compliant
|
Surfaces must be sound, dry and clean. Remove previous coatings that have poor adhesion.
Wash areas where mold and mildew are present. Remove all dirt, oil, grease, wax and/or other contaminant. Repair
cracks and fill voids. De-gloss shiny surfaces by lightly sanding. Clean and prime all bare metal surfaces with an
appropriate primer. Prime areas as needed. Test for adhesion and compatibility with existing finishes.
|
Never pour leftover coating down any sink or drain—use up material on the job or seal can and
store safely for future use. Do not incinerate closed containers. For specific disposal or recycle guidelines, contact
your local waste management agency or district. Always attempt to recycle whenever possible.
|
Limited Warranty: Miller Paint Company, Inc. warrants to the purchaser that this product
will provide satisfactory performance when applied according to label directions. If this product does not perform
to specifications, return unused portion along with sales receipt to place of purchase. As the sole remedy to purchaser,
dealer will, at its option: provide additional product to correct affected areas, replace with product of equal value or
refund the purchase price paid for this paint product. Failures caused by poor surface preparation, improper application
or a breakdown of the underlying surface or previous paint film are not covered by this warranty. THIS WARRANTY
SPECIFICALLY EXCLUDES LABOR OR COST OF LABOR OR INCIDENTAL OR CONSEQUENTIAL DAMAGES ASSOCIATED WITH THE USE OF THIS PRODUCT.
|
WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD
ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum
and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead
Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
|
