A premium, 100% Acrylic block filler
|
|
|
| Color: |
White |
|
| Finish: |
Flat |
|
| Density: |
12.9# per gallon |
|
| Clean-Up: |
Warm soapy water |
|
| VOC: |
77 gm/liter minus water |
|
| Solids: |
Weight
Volume |
73.4%
58.8% |
|
| Flash Point: |
N/A |
|
| Coverage: |
Approx. 50-100 sq. ft. per gallon depending on porosity |
|
Theoretical
Coverage: |
N/A |
|
| Dry Time: |
One hour to touch, overnight to recoat @ 70F and 50% relative humidity. |
|
| Application: |
Brush, roll or spray. Back brush or
backroll to work filler into the pores of the block. Do not apply at
temperatures below 45°F. |
|
|
|
Rev
3/09
|
|
An exterior heavy bodied block filler. Exterior Block Filler bridges and fills pores of cement and
pumice block. It aids in keeping water out of porous walls and acts as a primer for subsequent topcoats.
|
100% Acrylic
Titanium dioxide & extender pigments
Contains no lead or mercury
VOC compliant
|
Surfaces must be sound, dry and clean. Remove previous coatings that have poor adhesion.
Wash areas where mold and mildew are present. Remove all dirt, oil, grease, wax and/or other contaminant. Repair
cracks and fill voids. De-gloss shiny surfaces by lightly sanding. Clean and prime all bare metal surfaces with an
appropriate primer. Prime areas as needed. Test for adhesion and compatibility with existing finishes.
|
Never pour leftover coating down any sink or drain—use up material on the job or seal can and
store safely for future use. Do not incinerate closed containers. For specific disposal or recycle guidelines, contact
your local waste management agency or district. Always attempt to recycle whenever possible.
|
Limited Warranty: Miller Paint Company, Inc. warrants to the purchaser that this product
will provide satisfactory performance when applied according to label directions. If this product does not perform
to specifications, return unused portion along with sales receipt to place of purchase. As the sole remedy to purchaser,
dealer will, at its option: provide additional product to correct affected areas, replace with product of equal value or
refund the purchase price paid for this paint product. Failures caused by poor surface preparation, improper application
or a breakdown of the underlying surface or previous paint film are not covered by this warranty. THIS WARRANTY
SPECIFICALLY EXCLUDES LABOR OR COST OF LABOR OR INCIDENTAL OR CONSEQUENTIAL DAMAGES ASSOCIATED WITH THE USE OF THIS PRODUCT.
|
WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD
ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum
and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead
Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
|
