www.millerpaint.com
1-800-852-3254
Devine Color® - devinegreen
Breathable Wall Finish 4150 Series 
VOC Compliant
High Hide Formula
Bases Available: 4150 - White              4156 - Accent                 4158 - Neutral
Product Description     Specifications
Devinegreen Breathable Wall Finish is an environmentally responsible coating formulated specifically for use with the Devine Color Palette to produce a rich, soft look and feel.  It is an exceptionally low VOC, low odor product that is high hiding, low spatter, stain resistant, and durable.  Ideal for use in interior residential or commercial applications where a luxurious finish is desired.

    
Color: Devine Color Palette
Finish: Breathable Wall Finish
Gloss: 5.0-7.0 @ 60°
5.0-12.0 @ 85°
Density: 11.37# per gallon
Clean-Up: Mild soap and water
VOC: 1.4 gm/liter minus water
Volume Solids: 37.0%
Flash Point: N/A
Coverage: 300-400 sq. ft. per gallon.  Coverage depends on porosity and profile of surface.
Theoretical
Coverage:		 415 sq. ft. @ 1.5 dry mils
Dry Time: One hour to touch, 6 hours to recoat @70°F and 50%. 
Application: Brush, roll or spray. Spraying and backrolling recommended on new flat work. Do not apply at temperatures below 45°F. Keep product from freezing.

REV 3/09
Features

Low VOC
Low odor
Excellent flow and levelling
Low spatter
Durable finish
Composition
Acrylic
Titanium dioxide & extender pigments
Contains no lead or mercury
VOC compliant











Surface Preparation
Surfaces must be sound, dry and clean. Remove previous coatings that have poor adhesion. Wash areas where mold and mildew are present. Remove all dirt, oil, grease, wax and/or other contaminant. Repair cracks and fill voids. De-gloss shiny surfaces by lightly sanding. Clean and prime all bare metal surfaces with an appropriate primer. Prime areas as needed. Test for adhesion and compatibility with existing finishes.
Disposal
Never pour leftover coating down any sink or drain—use up material on the job or seal can and store safely for future use. Do not incinerate closed containers. For specific disposal or recycle guidelines, contact your local waste management agency or district. Always attempt to recycle whenever possible.
Warranty
Limited Warranty: Miller Paint Company, Inc. warrants to the purchaser that this product will provide satisfactory performance when applied according to label directions. If this product does not perform to specifications, return unused portion along with sales receipt to place of purchase. As the sole remedy to purchaser, dealer will, at its option: provide additional product to correct affected areas, replace with product of equal value or refund the purchase price paid for this paint product. Failures caused by poor surface preparation, improper application or a breakdown of the underlying surface or previous paint film are not covered by this warranty. THIS WARRANTY SPECIFICALLY EXCLUDES LABOR OR COST OF LABOR OR INCIDENTAL OR CONSEQUENTIAL DAMAGES ASSOCIATED WITH THE USE OF THIS PRODUCT.

Possible Existing Lead Warning
WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
Specification figures should be taken as accurate for products being produced at the time of publication in untinted white bases only. Formulation improvements may be made from time to time that may affect these figures to some degree. Also, manufacturing tolerances of ±2% are considered acceptable. Whenever a change is made that the Manufacturer considers substantial, the Product Analysis will be revised.