![]() |
||||
| www.millerpaint.com | ||||
| 1-800-852-3254 | ||||
| Devine Color | ||||
| Canopy 3250 Series | ||||
| VOC Compliant | ||||
| High Hide Formula | ||||
| Bases Available: | 3250 White | 3256 Accent | 3258 Neutral | |
| Product Description | Specifications | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Devine Color Canopy Interior Ceiling Paint is a superior quality acrylic archtitectural coating
developed and manufactured exclusively by Miller Paint Company. The matte flat finish is a perfect compliment to the
Devine Delicate Wall Finish. This unique product is easy to apply with low splatter, excellent flow and leveling
qualities. |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Features | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Canopy Interior Ceiling Paint offers exceptional hide, high build and excellent touch-up. The flat
finish helps minimize minor surface imperfections and provides good light diffusion. This product features very low odor
during application and drying. Canopy is available in the complete Devine Color Palette.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Composition | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fine quality acrylic resin Titanium dioxide & extender pigments Contains no lead or mercury VOC compliant |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Surface Preparation | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Surfaces must be sound, dry and clean. Remove previous coatings that have poor adhesion.
Wash areas where mold and mildew are present. Remove all dirt, oil, grease, wax and/or other contaminant. Repair
cracks and fill voids. De-gloss shiny surfaces by lightly sanding. Clean and prime all bare metal surfaces with an
appropriate primer. Prime areas as needed. Test for adhesion and compatibility with existing finishes. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Disposal | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Never pour leftover coating down any sink or drain—use up material on the job or seal can and
store safely for future use. Do not incinerate closed containers. For specific disposal or recycle guidelines, contact
your local waste management agency or district. Always attempt to recycle whenever possible. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Warranty | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Limited Warranty: Miller Paint Company, Inc. warrants to the purchaser that this product
will provide satisfactory performance when applied according to label directions. If this product does not perform
to specifications, return unused portion along with sales receipt to place of purchase. As the sole remedy to purchaser,
dealer will, at its option: provide additional product to correct affected areas, replace with product of equal value or
refund the purchase price paid for this paint product. Failures caused by poor surface preparation, improper application
or a breakdown of the underlying surface or previous paint film are not covered by this warranty. THIS WARRANTY
SPECIFICALLY EXCLUDES LABOR OR COST OF LABOR OR INCIDENTAL OR CONSEQUENTIAL DAMAGES ASSOCIATED WITH THE USE OF THIS PRODUCT.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Possible Existing Lead Warning | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD
ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum
and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead
Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Specification figures should be taken as accurate for products being produced at the time of publication in untinted white bases only. Formulation improvements may be made from time to time that may affect these figures to some degree. Also, manufacturing tolerances of ±2% are considered acceptable. Whenever a change is made that the Manufacturer considers substantial, the Product Analysis will be revised. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||